• Guest, Help The DPF Community Thrive - Join Our Donation Drive Today!

    We're launching a special DPF Donation Drive to ensure our beloved forum continues to flourish. Your support is vital in helping us cover essential server costs and keep our community running smoothly — This is more than just a donation; it's an investment in the future of our community.

    Join us in this crucial drive and let's ensure our forum remains a vibrant and dynamic place for everyone.

    Please visit the DPF Donation Drive Thread for details and instructions on how you can make your donation today!
  • DPF Member Pins NOW AVAILABLE!
    Head on over to the Official Announcement to secure your pin today!

PIN & POP PIN & POP Site Announcements & Ideas

IMG_3819.jpeg

For fun, this is phase 1 of my card / SKU project. The box and the stack in front is completed, identified, in my personal inventory “does it have a backer card” updated. As well as SKUs entered and verified in Pin & Pop. I went through over 2 packs of 500 Post-It Page Markers. So it’s about 1100 cards.

The little stack in the back are cards that I acquired somehow without owning the pin.

The tray are cards for pins not in Pin & Pop yet.

The small stack in front of the tray are cards I could not identify via P&P, MPC or PinPics. I think I can probably figure out some of them on a second pass because they should go with a specific series. For those I can use Worthpoint or EBay photos to match them up.

I have a shoebox full of Disney Store Series cards. Which shouldn’t be too hard outside of updating my personal inventory fields.

Phase 2 will take a lot longer. All the pins still on original cards and in various temporary storage and not permanent homes (bags, frames).
 
hopemax said:
View attachment 22619

For fun, this is phase 1 of my card / SKU project. The box and the stack in front is completed, identified, in my personal inventory “does it have a backer card” updated. As well as SKUs entered and verified in Pin & Pop. I went through over 2 packs of 500 Post-It Page Markers. So it’s about 1100 cards.

The little stack in the back are cards that I acquired somehow without owning the pin.

The tray are cards for pins not in Pin & Pop yet.

The small stack in front of the tray are cards I could not identify via P&P, MPC or PinPics. I think I can probably figure out some of them on a second pass because they should go with a specific series. For those I can use Worthpoint or EBay photos to match them up.

I have a shoebox full of Disney Store Series cards. Which shouldn’t be too hard outside of updating my personal inventory fields.

Phase 2 will take a lot longer. All the pins still on original cards and in various temporary storage and not permanent homes (bags, frames).
Click to expand...
What do you do with wacky shapes like this?
 

Attachments

  • s-l1200 (1).webp
    s-l1200 (1).webp
    155.3 KB · Views: 2
hopemax said:
The last week or so, I have been working through identifying my baseball card box full of backer cards. This is due to Pinpics saying they're removing SKUs in September *sigh*. This means I've been doing *a lot* of searching, editing and fixing errors. It would be nice if the Series Table View page included the SKU in the empty space next to the Title (Price too) and I'm not sure Series Name is needed next to each pin in the Series View since it already listed twice on the page. Also, if the Rarity also displayed the Edition Size beneath the designation. I'm trying to work through hundreds of cards, and each extra click, and necessary scrolling adds up. Being able to view this information in Series View would make it so much faster to figure out which pins are missing SKUs, have wrong SKUs, have partial SKUs and same for LE size. You can tell when people have used the "Add Similar" button and apparently thought all the Series had the same LE but they actually don't. Anyway, it would be so much easier to identify and fix whole Series at one time vs having to click through to each individual listing to verify info.
Click to expand...
@hopemax you can now customize what columns you want to see in the table view (i.e., SKU and Edition) and it will persist to all pin table views. Let me know if that works for you.
 
hopemax said:
View attachment 22619

For fun, this is phase 1 of my card / SKU project. The box and the stack in front is completed, identified, in my personal inventory “does it have a backer card” updated. As well as SKUs entered and verified in Pin & Pop. I went through over 2 packs of 500 Post-It Page Markers. So it’s about 1100 cards.

The little stack in the back are cards that I acquired somehow without owning the pin.

The tray are cards for pins not in Pin & Pop yet.

The small stack in front of the tray are cards I could not identify via P&P, MPC or PinPics. I think I can probably figure out some of them on a second pass because they should go with a specific series. For those I can use Worthpoint or EBay photos to match them up.

I have a shoebox full of Disney Store Series cards. Which shouldn’t be too hard outside of updating my personal inventory fields.

Phase 2 will take a lot longer. All the pins still on original cards and in various temporary storage and not permanent homes (bags, frames).
Click to expand...
Nice! I know someone (I think it was @Randakinskywalker ) had requested a way to mark if a pin has a backer card and, if so, mark the basic shape of the card. ... the first would be easier to do 🙂
 
So for an example of how great this is working (unless you’re a Mod, maybe 🤣 ) I just went through the Countdown to the Millennium Disney Store set. Expected it to be straightforward, these are old well documented pins. Still had to make like 5 Reports with typos or outright wrong SKUs. Not sure I would have caught all of them, if it wasn’t for the new Table View.
 
hopemax said:
So for an example of how great this is working (unless you’re a Mod, maybe 🤣 ) I just went through the Countdown to the Millennium Disney Store set. Expected it to be straightforward, these are old well documented pins. Still had to make like 5 Reports with typos or outright wrong SKUs. Not sure I would have caught all of them, if it wasn’t for the new Table View.
Click to expand...
Can you not edit listings anymore?
 
On the bottom of the profile page at the "where I trade", etc or someplace else a link to a users DPF user name.

That might make pre-emptive strikes for trades a little easier as they can be done via DM
 
hdtv267 said:
On the bottom of the profile page at the "where I trade", etc or someplace else a link to a users DPF user name.

That might make pre-emptive strikes for trades a little easier as they can be done via DM
Click to expand...

486e1503307e626ef2afba91eb6458bd.jpg

You can put your DPF user name under “where I trade”


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top